1. Introduction
2. Specification
3. Howto
4. Tooltrain
5. Source Codes
6. Schematic and PCB
7. FAQ
8. Support
9. Availability

1. Introduction

• LOM-ARM9 is an ATmel AT91RM9200(ARM920T) Evaluation Board, It is only assembled necessary components for running ARM-Linux. User's expanded hardware board can be connected to LOM-ARM9 Board via the two 80 pin signal sockets.
• Only bootloader code is stored in board's EEPROM , kernel image and ramdisk is download from host when the board running armlinux.

2. Specification

• AT91RM9200 180Mhz
• 32Mb SDRAM
• 64Kb EEPROM（AT24C512)
• 1M byte Flash(option)
• One 10/100M Network Port
• One USB Host Port
• One USB Device Port
• One Simple UART
• 5V/800mA DC Power Supply
• Two 80 Pin Expand Sockets
• OS:ARM-Linux (2.4.x)

• AT91RM9200 equiped with losts peripheral device interface for more pls visit ATmel technical documents。Top

3. Howto

• Test LOM-ARM9 Board
• Build Cross Compiler
• make kernel
• ramdisk and application howto

4. Tooltrain

• Download arm-linux-gcc

• build tooldtrain

• Top

5. Source Codes

• ARM-Linux-patch ( www.arm.linux.org.uk )
• Loaer and Uboot
• zImage and Ramdisk(binary)

6. Schematic and PCB file

• Schematic（Protel99SE file）
• PCB (no available)
• PCB Board Picture

7. FAQ

• FAQ for LOM-ARM9 Evaluation Board

8. Online Support

• Email me
• Forum on www.edw.com.cn

9. Availablity

• PCB board is available
• I will make several finished boards and provide for guys who doesn't like do LOM-ARM9 board by himself, mail me ,maybe you can get one.
• LOM_ARM7 evaluation kit